home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.19950726-19950929
/
000184_news@columbia.edu_Fri Aug 18 20:08:01 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1995-12-25
|
2KB
Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA07935
(5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Sat, 19 Aug 1995 05:08:38 -0400
Received: by apakabar.cc.columbia.edu id AA25873
(5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Sat, 19 Aug 1995 05:08:37 -0400
Path: news.columbia.edu!news.cs.columbia.edu!pipeline!uunet!in1.uu.net!news.injersey.com!legba.synergy.net!usenet
From: RAMANAN.SREEDHAR@mhs-pfg1.attmail.com
Newsgroups: comp.protocols.kermit.misc
Subject: Kermit thru Windows over Token-Ring
Date: 18 Aug 1995 20:08:01 GMT
Organization: Synergy Communication Inc.
Lines: 55
Message-Id: <412rv1$1fd@legba.synergy.net>
Nntp-Posting-Host: inet2.principal.com
X-Newsreader: SPRY News 3.03 (SPRY, Inc.)
Apparently-To: kermit.misc@watsun.cc.columbia.edu
HELLO:
I am trying to get Kermit 3.14 to run Windows 3.1 loaded from a Novell Token-Ring Server. I am
loading both ODIPKT and WINPKT in my "startnet.bat" and have a second frame, Token-Ring_Snap
for my IP, ARP and RARP protocols in my "net.cfg" file. My files are as follows:
STARTNET.BAT
----------------------------
LSL
TOKEN
ODIPKT 1 99
WINPKT 0x63
IPXODI
VLM
and NET.CFG
---------------
protocol KERMIT
bind Token
Link Driver TOKEN
Frame TOKEN-RING
Frame TOKEN-RING_SNAP
Protocol IPX E0 TOKEN-RING
Protocol IP 0800 TOKEN-RING_SNAP
Protocol ARP 0806 TOKEN-RING_SNAP
Protocol RARP 8035 TOKEN-RING_SNAP
Now, when I try to connect to an UNIX Server on the ring using TCP/IP, Kermit comes up with the
following error message:
Unable to ARP resolve gateway <gateway-address>
Unable to connect to the host
?Cannot start connection
The "show network" command of MSKERMIT shows that TCP/IP port is #23 and using the
Packet-Driver-interrupt: \0x63. Also, the "check tcp" command comes back as TCP/IP Available.
Kermit is not able to make a connection to the UNIX Server, both from DOS prompt and going through
Windows 3.1
However, if the ODIPKT and WINPKT drivers are not loaded through "startnet.bat", then Kermit is
able to make a successful connection, from DOS prompt, to the UNIX Server. Kermit then is using the
ODI packet driver.
Any help I can get to resolve this problem is greatly appreciated.
Thanks in advance,
Sreedhar Ramanan
RAMANAN.SREEDHAR@MHS-PFG1.attmail.com